|
|
Degradation of Photovoltaic Modules
Poledník, Tomáš ; Křivík, Petr (referee) ; Vaněk, Jiří (advisor)
The bachelor diploma thesis is focused on the constructional technology of the solar modules as well as on the problems of the induced degradation under the influence of the potential. It specifies the key issues and possible elements that influence the effect of environment with regard to possible causes of the origin of degeneration. The thesis includes the description of measuring of the polycrystalline and monocrystalline technologies that are resistant to the leading potential. Furthemore, the measuring was carried out on the chosen testing pieces that had been affected by the degradation of the output
|
|
| |
|
|
Exoskeleton design
Štancl, Jan ; Lázna, Tomáš (referee) ; Kopečný, Lukáš (advisor)
The bachelor paper „Exoskeleton design“ deals with development of prosthetic exoskeleton of index finger. The exoskeleton is for patient who lost the distal and middle articles of the index finger. The exoskeleton consist of three articles. Distal and middle articles are powered by one linear actuator, proximal article is passive. The articles are mechanically connected to each other. The rotary potenciometer senses the bend angle at the MP joint, which corresponds to the desired position of the exoskeleton. Feedback is provided by optic gate that senses the engine revolutions.
|
|
|
Controll Electronics for Effective Supplying of Equipment with Li-Ion Accu by Solar Cells
Horký, Luděk ; Dřínovský, Jiří (referee) ; Urbanec, Tomáš (advisor)
This Bachelor`s thesis deals with questions surrounding the collection and harnessing of solar radiation for use as electrical energy. The aim of this project was to build an effective system for charging Li-Ion batteries by means of solar cells. To this end, four different solar panels currently available were chosen for measuring and evaluation. The most suitable of these was chosen and an electronic control system devised for effectively supplying the Li-Ion batteries. It was necessarily to make solution for problems consequent upont this method of charging this type of battery and make practise realizitaion of this electrical scheme by SMT technology.
|
|
|
Small scale photovoltaic system
Vaľočík, Jan ; Škvařil, Jan (referee) ; Pospíšil, Jiří (advisor)
The aim of this work is utilization of solar energy for electrical energy production focusing on photovoltaics. First, the principle, function and structure of photovoltaic cells is described. Then the current types of cells are introduced, followed by possibilities on how to increase the production of electrical energy from photovoltaic modules. Subsequently the connection methods between the photovoltaic systems and the network are discussed. The thesis is concluded by a design of a small scale photovoltaic system for a family house including an economic evaluation.
|
|
|
Photovoltaic, as an alternative source of electricity
Honka, Pavel ; Moskalík, Jiří (referee) ; Pospíšil, Jiří (advisor)
The work deals with alternative sources of energy and it concentrates on a photovoltaic. There are represented the main types of solar cells, the principles of their functioning and methods of increasing their efficiency. There is also a summary of possibilities of connection of the photovoltaic system and related methods of energy accumulation. On the basis of above mentioned extent of information there is suggested a project of photovoltaic power station which supplies a holiday house by produced energy.
|
|
|
Project of Photovoltaic Power Plant Grid Connection
Blažek, Tomáš ; Procházka, Aleš (referee) ; Orságová, Jaroslava (advisor)
This bachelors thesis deals with photovoltaic technology and economic evaluation of used technology equipment. The first part describes the technology for extraction of power from photovoltaic sources - transformer 22/0,4kV and its basic parts. Then there is the calculation of the amount of openings for cooling the transformer according to ČSN 33 3240. The second part focuses on the description of the major part of the photovoltaic plant. Here are divided solar panels on the material from which they are produced and the type of installation in the field. Next is describe the types of inverters, their principles and functions. The last part compares the different types of transformers and operating costs over the lifetime of plants (20 years), are described factors for proper selection of inverters and solar panels.
|
|
|
The study of the behavior of track chassis using dynamic simulation
Kukla, Lukáš ; Kašpárek, Jaroslav (referee) ; Jonák, Martin (advisor)
Objectives of the thesis is to develop research summarizing knowledge about the types of tracked undercarriages for existing mobile machines. Developing critical analysis of the various designs of track undercarriages with regard to their use - forest terrain, unpaved surface. Creating a basic structural design of one of the selected type of belt chassis suitable for use in the field. Verification by the design using dynamic simulation.
|
|
|
Determination of the most suitable ratio of cathode materials for the lithium-sulfur battery system
Benešová, Petra ; Kazda, Tomáš (referee) ; Jaššo, Kamil (advisor)
This master's thesis deals with a topic of determination of the most suitable ratio of cathode materials for the lithium-sulfur systems. The first two chapters provide a general introduction to the topic of electrochemical energy sources and present the commonly used primary and secondary battery systems with emphasis on their characteristics and applications. The core of the theoretical part is dedicated to lithium-ion and lithium-sulfur batteries, their working principles along with the benefits or drawbacks related to the particular systems, and widely used materials. The experimental part briefly comments on determining the suitable electrode paste preparation method, the subsequent main part is focused on evaluation of electrochemical performance of cells using different ratios of cathode materials. Five samples of cathode materials were prepared, where the sulfur ratio is in range from 64 to 88 wt. %. Finally, the comparison of all prepared ratios in terms of their electrochemical properties is provided.
|
|
|
Photovoltaic panels of new generation
Loveček, Michal ; Radil, Lukáš (referee) ; Mastný, Petr (advisor)
The Bachelor thesis deals with the possibilities how to take use of photovoltaic power stations situated in the Czech Republic. In the first part there is the procedure of photovoltaic energy convertion analyzed and the source of this energy described – Sun. The pieces of information about the technology of sollar cells manufacturig and some new technologies recently developed by scientist are summed up in the following part. As next there is the function of photovolatic arrays described as well as how the form of their construction affect their effectiveness. And last but not least the individual project of FV system for family house in Czech Republic with its evaluation is worked out.
|
guest ::
